Brand: Fischer

Model Number: 93180

Content: 300 ml (490 g)

ETA-approval: Yes

• ETA-02/0024
• ETA-08/0266
• ETA-10/0383
• DoP No. 0188
• DoP No. 0189
• DoP No. 0229
• DoP No. 0304
• ESR-2786
• 21843_3enshort
• EPD­DBC­FIW­20220088­IBE2­DE

APPLICATIONS:

• Steelwork constructions
• Timber constructions
• Guard rails
• Façades
• Staircases
• Steel brackets
• Machines
• Masts
• Awnings
• Canopies
• Gates
• Consoles
• Pipelines
• Gratings
• Satellite antennas

BUILDING MATERIALS

• Steelwork constructions
• Timber constructions
• Guard rails
• Façades
• Staircases
• Steel brackets
• Machines
• Masts
• Awnings
• Canopies
• Gates
• Consoles
• Pipelines
• Gratings
• Satellite antennas

Country of Origin: Made in Germany

FEATURES

• Extended working time prevents premature curing.
• Application with sealant gun.
• Maximum load absorption for much greater security.
• Extensive range of system accessories.
• Expansion-free fixing for small spacings and edge distances.

ADVANTAGES

• The injection mortar FIS V has a range of system approvals, for cracked and non-cracked concrete, masonry, and rebar connections, for example. FIS V is therefore the universal injection mortar family with guaranteed safety for almost every application.
• FIS VW HIGH SPEED has a significantly shorter hardening time than FIS V, which ensures swift work progress even at low temperatures.
• The FIS VS LOW SPEED has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths.
• The extensive range of accessories is perfectly tailored to the injection mortar family FIS V, increases the high flexibility of the system, and thus enables a broad range of applications.

FUNCTIONALITY

• FIS V is a 2-component injection mortar based on a vinyl ester hybrid concept.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The mortar is extruded bubble free from the drill hole base.
• The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
• The injection cartridges are quick and easy to use with the Fischer dispensers.
• Partially used cartridges can be reused by changing the static mixer.

Brand: Fischer

Model Number: 523226

Content: 300 ml (490 g)

Country of Origin: Made in Germany

APPLICATIONS

• Awnings
• Canopies
• Fireplaces
• French balconies
• Fire escapes
• Gratings
• Gates
• Handrails

BUILDING MATERIALS

Approved for anchorings in:

• Concrete C20/25 to C50/60, non-cracked
• Vertically perforated brick
• Perforated sand-lime brick
• Solid sand-lime brick
• Perforated blocks made from lightweight concrete
• Solid brick
• Aerated concrete

Also suitable for:

• Solid brick made from lightweight concrete

APPROVAL

• ETA-11/0419
• ETA-18/0383
• DoP No. 0025
• DoP No. 0128

ADVANTAGES

• With FIS P Plus, anchorings in masonry and non-cracked concrete for which approval is relevant can be realised in a particularly economical manner.
• FIS P Plus 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. As a result, procurement costs can be reduced on the basis of polyester resin.

FUNCTIONALITY

• FIS P Plus is a 2-component injection mortar based on polyester resin.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The mortar is extruded bubble free from the drill hole base.
• The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
• Partially used cartridges can be reused by changing the static mixer.

Brand: Fischer

Model Number: 562629

Content: 390 ml (660 g)

Country of Origin: Made in Germany

• Heavy steel constructions
• Consoles
• Silo installations
• Tall shelving
• Post-installed rebar connections

ADVANTAGES

• The injection mortar FIS EB II has ETA assessments for anchorings in cracked concrete and for post-installed rebar connections.
• FIS EB II is the reliable system for fixing heavy loads indoors and outdoors.
• Due to the variable anchoring depths, the epoxy resin mortar is very versatile.
• The long processing time of FIS EB II is particularly suitable for applications in large and deep drillholes.

BUILDING MATERIALS

Approved for anchorings in:

• Concrete C20/25 to C50/60, cracked and non-cracked

APPROVAL

• ETA-21/0469
• ETA-21/0470
• DoP No. 0295
• DoP No. 0296

FUNCTIONALITY

• The epoxy mortar FIS EB II in combination with the threaded rod FIS A and RG M is suitable for pre-positioned and push-through installation.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The mortar is injected bubble-free from the drill hole base.
• The mortar bonds the entire surface of the threaded rod with the drill hole wall and seals off the drill hole.
• The threaded rod is set manually by slightly rotating it until it reached the drill hole base.
• During push-through installation, the annular gap between the threaded rod and the attachment is filled with FIS EB II.